Push Bar; Adjusting The Push Bar; Wheel Lock - Otto Bock Kimba Neo Instructions For Use Manual

Use
38

8.2.3 Push bar

CAUTION
Lifting by removable components
User tipping over, falling due to lifting by removable components
► The product may be lifted only by firmly welded or permanently attached components. It is particularly danger­
ous to lift the product by the leg support, push handle/push bar, lap bar or arm supports.

8.2.3.1 Adjusting the push bar

The push bar can be adjusted to the desired height:
1) Press both buttons on the setting joints on both sides simultaneously (see fig. 41, item 1).
2) Move the push bar to the desired position (see fig. 41, item 2).
3) Release the buttons.
4) Move the push bar up or down slightly until the joints click audibly into place.
40

8.2.4 Wheel lock

CAUTION
Wheel lock not engaged when getting in or out
Falling, tipping over of the user due to user error
► Before the user gets in or out, always engage and check the wheel lock.
► Engage the wheel lock to prevent the rehab buggy from moving on uneven ground or during transfers (e.g.
into a car).
28
39
41
Kimba Neo, Kimba Cross, Kimba Inline
2
1