Coupling The Trailer To The Bicycle; Equipment Package; Additional Options; Swivelling Front Wheel - Otto Bock Kimba Neo Instructions For Use Manual

8.3.7.2 Coupling the trailer to the bicycle

The instructions for connecting the trailer to the bicycle are written on a sticker which is attached to each draw-bar.
The trailer draw-bar will additionally be secured to the bicycle frame with a safety strap.

8.3.7.3 Equipment package

The equipment package is required for use in road traffic.
The equipment package includes:
• Roll bar
• Pennant
• Lighting (taillight red; rear reflector red)
• Reflectors, self-adhesive, white
• Spoke reflectors
The components of the equipment package are installed at the factory and by qualified personnel.

8.3.8 Additional options

8.3.8.1 Swivelling front wheel

The swivelling front wheel reduces the turning radius of the rehab buggy, making it easier to use in confined
spaces.
1) Remove the fixed front wheel with the splash guard (see Page , Installing the front wheel).
2) Insert the swivelling front wheel into the fork and push it to the rear and up (see fig. 87, item 1).
3) Close the eccentric lever of the quick-release axle (see fig. 88).
87

8.3.8.2 Splash guard for rear wheels/clothing protectors

1) Press the central bolts of the quick-release axles and remove the rear wheels.
2) Insert the splash guard adapter and screw it in place (see fig. 89, item 1).
3) Insert the splash guard into the receiving holes (see fig. 90).
4) Insert and lock the rear wheels.
89

8.3.8.3 Anti-tipper

The anti-tipper prevents the mobility base from tipping too far backward.
Kimba Neo, Kimba Cross, Kimba Inline
88
90
Use
45