Cup Holder; Disassembly And Transport - Otto Bock Kimba Neo Instructions For Use Manual

• Installation of the large T1 respirator platform over the front wheels (see fig. 53) – the user sits in the seat
facing away from the direction of travel
• Installation of the large T1 respirator platform over the rear wheels (see fig. 54) – the user sits in the seat facing
in the direction of travel
The seating unit can only be turned around if the respirator platform is moved.
INFORMATION: in this case, contact the qualified personnel who adjusted your product.
53

8.2.7.6 Cup holder

The cup holder (see fig. 55) is for holding a drinking bottle within reach of the user or the attendant. It can be
placed as required on the push bar, on the folding tube or on the grab rail.
Installing the cup holder
1) Only when the tube is vertical: secure the self-adhesive hook-and-loop straps in the desired position and at
the correct distance apart. These secure the cup holder when the bottle is full.
2) Secure the cup holder with the hook-and-loop straps in the desired position.
55

8.2.8 Disassembly and transport

CAUTION
Exposed pinch points
Crushing, pinching due to incorrect handling
► When folding out the backrest, only grip by the specified components.
NOTICE
Deformation while folded
Damage to the product, problems with unfolding due to improper loading
► Never place heavy objects onto the folded product.
► Make sure that objects placed in the storage bag cannot be crushed while folding.
Kimba Neo, Kimba Cross, Kimba Inline
54
56
Use
33