Storage Bag; Spoke Protector; Disassembly And Transport; Folding The Chassis - Otto Bock Kimba Neo Instructions For Use Manual

Use
1) Loosen the screw connection of the right rear axle and remove the nut and lock washers.
2) Put on the anti-tipper so that the fork of the anti-tipper engages with the crossbrace (see fig. 91).
3) Guide the bore hole of the anti-tipper over the rear axle and reinstall the nut with the lock washers.
4) Tighten the nut. Optional: By pressing down and then turning, swing the anti-tipper from the active to the
passive position (see fig. 92 and see fig. 93).
91
93

8.3.8.4 Storage bag

1) Attach the side of the storage bag with 3 snap fasteners to the lateral frame tube.
2) Attach the side with 2 snap fasteners to the right and left of the base frame.

8.3.8.5 Spoke protector

► Attach the spoke protector to the spokes with mounting elements.

8.3.9 Disassembly and transport

CAUTION
Exposed pinch points
Crushing, pinching due to incorrect handling
► When folding out the backrest, only grip by the specified components.
NOTICE
Deformation when folded
Damage to the product, problems unfolding due to unallowable loads
► Never place heavy objects on the folded product.
INFORMATION
The product can be equipped with the Kimba Neo seating unit or alternative seating systems. In this case, please
observe the information in the separate instructions for use for the seating system.

8.3.9.1 Folding the chassis

1) Pull the quick-release axles and the wheels together out of the axle retainer.
46
92
Kimba Neo, Kimba Cross, Kimba Inline