Rotating The Seating Unit; Adjusting The Seat Angle - Otto Bock Kimba Instructions For Use Manual

Use
5) Tilt the seat backwards (see fig. 9, item 1) at an angle of approx. 45° and then lift it up and out.
b) Attaching the seating unit
For information on attaching the seating unit, see page 12.
7
9

7.1.2 Rotating the seating unit

1) Detach the seating unit. See the previous section for information on detaching the seating unit.
2) Turn the seating unit in the desired direction. For information on the possible directions of the seating unit, see
page 12.
3) Attach the seating unit. For information on attaching the seating unit, see page 12.

7.1.3 Adjusting the seat angle

CAUTION
Changed centre of gravity after operating the seat tilt
Tipping over, falling out of the user due to adjustment error
► Check the tip resistance each time after changing the seat tilt, especially in combination with a back support
angle setting. Secure the outdoor mobility base against tipping due to the shift in the centre of gravity.
► Avoid any extreme settings.
► Do not suspend loads on the push handles since this would additionally change the centre of gravity.
14
8
Kimba