Danfoss VFD500 Series Manual page 25

VFD500 high performance vector control frequency inverter user manual
① Unscrew the two screws at the bottom of
the bottom cover
② Remove the cover vertically
◆SIZEH～SIZE I( 110KW-160KW) Removal and installation of cover
①Unscrew the two screws at the bottom of
the cover
Chapter3 Product appearance and wiring
① Close the cover vertically
② Tighten the two screws on the bottom of
the cover
②Hold both sides of the cover with both
hands and lift the lower part of the cover
③Push up and lift the entire cover (becareful
or you will snap the keyboard cable )
Installation steps
22