Advertisement
NOTE: On the operating days, as a factory setting the weekend is already active. If you dont wish an
operation at weekend, you need to deactivate it. For deactivation, first choose the Saturday to
also check the parameters from 502 to 506 i
Then you will again need to set the time switch programme via the parameter 500.
There are 4 different options here.
1. Monday-Sunday (Whole week)
2. Monday-Friday (Weekdays)
3. Saturday-Sunday (Weekend)
4. Monday .................Friday (Individual days seperately)
You have 3 times for switch on and off in a day.
Parameter 501: First switch on time
Parameter 503: Second switch on time
Parameter 505: Third switch on time
You can view the example shown below. In the example, we have a time switch programme for the
weekdays and we have 3 phases in a day.
Rev: RINNAI Service manual (English)
Date:14/05/2019
Parameter 502: First switch off time
Parameter 504: Second switch off time
Parameter 506: Third switch off time
78
-----
---
Advertisement
