Advertisement
There
a shutter valve (manual and/or automatic) between the expansion vessel and the
boiler due to dangerous situations for human health.
Extras / Warnings For Proper Installations
pressure losses of the heat exchanger coupled with the pump characteristic curves can be found in
the further pages of the text.
The con
acidic contamination thus must be neutralized before drainage to earth. For further information
Section 4.2. Condensate Syphon Circuit and Condensate Neutralization
A 24 lt expansion vessel should be connected per an aiM boiler in the primary circuit. The
expansion vessels for the secondary circuit region must be properly selected by the contractor firm.
2.5.6. Minimum Free Space Dimensions To Be Left Between the Boiler and the Walls
The minimum dimensions of free space to be left between the boiler and the walls taking the ergonomy of
the service personnel into account while working is stated in the below image as seen.
The LMS 14 boiler controller card has a frost protection system for a possible situation of water freezing
due to low air temperatures. In order for this property to be active, the system must be connected to
menu. This advantageous property of the card is advised to be teken into account when to be used in
places like low temperature boiler rooms.
When coaxial flue pipe is used
mixing of the flue gas to inhaled (sucked) fresh air, the flue pipe should be at correct distances when
installed from the roof and side walls of the building.
Rev: RINNAI Service manual (English)
Date:14/05/2019
for exhaust and fresh air intake
22
iginated) is in
ystem parameters
in order to prevent the possibility of
Advertisement
