health standards it is highly acidic.
Your aiM boiler has the mentioned acidic contaminatio
and as seen in the upper condensate circuit example, it should be neutralized before
drainage.
The acidity of aiM boilers
neutralization.
In case of a cascade system setup, two boilers and more will violate the rule of 200 kW
bottom limit for total settled sytem output. Included in the range (>200 kW total output)
the condensate must be neutralized whether if a minimal pair of aiM 105 M and aiM 105 S
are used thus, a neutralizer must be used.
The final [pH] value will be between 6 and 7 (neutral) after neutralization.
Rev: RINNAI Service manual (English)
Date:14/05/2019
61
[pH] = 3,5
4 before