Rinnai aiM 65 M/S Manual page 55

Therefore, the boiler water temperature will be raised. During this operation, outside
temperature and the confort setpoint will also affect.
For instance, the slope of 1,8 or 2 can be set for the cities which have hard climate conditions.
The slope is 1,5 as factory settings. Heating circuit slope can be set for all three heating circuits
seperately.
Ex: Heating circuit 1 curve slope setpoint
Rev: RINNAI Service manual (English)
Date:14/05/2019
Ex: Heating circuit 1 raised value
72