Advertisement
4.4.3. Fast Comissioning and Related Settings
4.4.3.1.
Language Selection
On the main display, press ESC for a couple of times to see Boiler Temperature (or Cascade Temperature
for cascade case).
Press OK for once. Roll the selection wheel and stand on Operator Section. Press OK for once. As in the right
image you will see the active language setting. Press OK for once again. The language name will start to
blink. You can now roll the selection wheel to toggle between languages. When you find the desired
language, press OK for once to confirm.
setting will stay.
Attention! : If you are not familiar with a new language selection, it is impossible to take the process back
without the same steps. Thus you may get lost in the menu. Please refer to a native speaker of the new
language selection.
4.4.3.2.
Settings at the Engineer Level
for the automatic operation. You can adjust the time respectively via the pictures shown below. For
all settings, you can use the engineer level.
Rev: RINNAI Service manual (English)
Date:14/05/2019
8 seconds, the selection will not be accepted and your active
69
Advertisement
