Start The Measurement Via The Xrf Analyzer Pro Software Program; Start Measurement At Instrument - Ametek Spectro MIDEX Original Operating Instructions

5.5.2

Start the measurement via the XRF Analyzer Pro software program

1. Start the measurement using the green "START" button. The pushbutton at
the bottom left-hand side of the instrument housing starts to flash.

The measurement is performed automatically.

The measurement has been completed when the completion is confirmed by
the software program in the header.
Information
Measure a reference sample at regular intervals. This will allow you to identify
changes of the measurement results in good time.
5.5.3

Start measurement at instrument

1. Press the pushbutto.n at the bottom left-hand side of the instrument housing.

The pushbutton starts to flash.
 The measurement is automatically performed using the parameters set in
the software program.

The measurement has been completed when the pushbutton at the left-hand
side of the housing remains lit.
SPECTRO MIDEX — 05.10.2017
Operation
— 23