Installing The Via Emio-5531 Usb Wi-Fi & Bluetooth Module; Figure 55: Installing The Via Emio-5531 Module To The Chassis; Figure 56: Connecting The Usb Wi-Fi Cable (Via Emio-5531) - VIA Technologies EPIA-P910 User Manual

A.2. Installing the VIA EMIO-5531 USB Wi-Fi & Bluetooth Module
Step 1
Mount the VIA EMIO-5531 module to the prepared standoff in the chassis. Align the two mounting holes
on the VIA EMIO-5531 module with the mounting holes on the standoffs, and then secure the VIA EMIO-
5531 module in place with two screws.

Figure 55: Installing the VIA EMIO-5531 module to the chassis

Step 2
Connect one end of USB Wi-Fi cable to the onboard USB 2.0 connector (WLAN) on VIA EPIA-P910-A I/O
expansion card, and then connect the other end of the cable to the VIA EMIO-5531 module.

Figure 56: Connecting the USB Wi-Fi cable (VIA EMIO-5531)

Note:
Make sure the VIA EPIA-P910-A I/O expansion card is installed on the VIA EPIA-P910 before installing the VIA
EMIO-5531 module.
VIA EPIA-P910 User Manual
53