Figure 53: Installing The Wi-Fi Antenna Cable (Via Emio-1533); Figure 54: Connecting The Wi-Fi Antenna Cable To The Via Emio-1533 Module - VIA Technologies EPIA-P910 User Manual

VIA EPIA-P910 User Manual
Step 3
Insert the Wi-Fi antenna cable into the antenna hole from inside of the panel I/O plate. Insert the toothed
washer, fasten it with the nut, and install the external antenna.

Figure 53: Installing the Wi-Fi antenna cable (VIA EMIO-1533)

Step 4
Connect the other end of the Wi-Fi antenna cable to the micro-RF connector labeled "I-PEX" on the VIA
EMIO-1533 module.

Figure 54: Connecting the Wi-Fi antenna cable to the VIA EMIO-1533 module

52