VIA Technologies EPIA-P910 User Manual page 64

VIA EPIA-P910 User Manual
Step 3
Insert the Wi-Fi antenna cable into the antenna hole from inside of the panel I/O plate. Insert the toothed
washer, fasten it with the nut, and install the external antenna.
Figure 57: Installing the Wi-Fi antenna cable (VIA EMIO-5531)
Step 4
Connect the other end of the Wi-Fi antenna cable to the micro-RF connector labeled "I-PEX" on the VIA
EMIO-5531 module.
Figure 58: Connecting the Wi-Fi antenna cable to the VIA EMIO-5531 module
54