Configuring The Emio-2550 Minipcie Mobile Broadband Module; Connecting To The Internet - VIA Technologies VAB-820 Quick Start Manual

5.3. Configuring the EMIO-2550 miniPCIe Mobile Broadband
Module
The EMIO-2550 miniPCIe Mobile Broadband module supports 3G and GPS functions.

5.3.1 Connecting to the Internet

The first step is to insert an active SIM card into the EMIO-2550 module, then insert this
EMIO-2550 module into the VAB-820. Next, power on the VAB-820.
To check that the board has correctly detected the EMIO-2550 module, use the following
command:
root@vab820_6dq:/ # busybox ifconfig
Make sure the printout message includes "ppp0 Link encap: Point-to-Point Protocol".
Click Settings->Wireless & networks-> More -> Cellular network ->Access Point Names.
Next, click add add button to add your APNs setting. add add
VAB- - - - 820 VAB VAB VAB 820 820 A A A A ndroid BSP v 820
Inserting t Inserting the EMIO Inserting t Inserting t he EMIO he EMIO- - - - 2550 module he EMIO 2550 module 2550 module 2550 module
BSP v4 4 4 4 .0.2 Quick Start Guide BSP v BSP v .0.2 Quick Start Guide .0.2 Quick Start Guide .0.2 Quick Start Guide
16