Onboard Device Configuration; Onboard Lan Enable; Eup/Erp Lot6 Support; S5 Wakeup On Lan - VIA Technologies EPIA-P910 User Manual

VIA EPIA-P910 User Manual

6.5.7. OnBoard Device Configuration

The OnBoard Device Configuration screen has the following features.

Figure 41: Illustration of OnBoard Device Configuration screen

6.5.7.1. OnBoard LAN Enable

The OnBoard LAN Enable feature determines whether the onboard LAN controller will be used or not.

6.5.7.2. EuP/ErP Lot6 support

The EuP/ErP Lot6 Support feature enables the BIOS to reduce the power draw to less than 1W when the
system is in standby mode. This feature has two options: enabled and disabled.

6.5.7.3. S5 Wakeup On LAN

The S5 Wakeup On LAN feature enables the BIOS to allow remote wake-up from the S5 power off state
through the PCI bus.

6.5.7.4. 1CH LVDS Backlight Control

Backlight Control
The Backlight Control feature control by VX11H enables the user to control the brightness of the 1CH
LVDS backlight. This feature has six options.
Level
0%, 20%, 40%, 60%, 80% and 100%.
37