Sdio_Cr Configuration; Sdio Host Controller; Sdio Specification Ver3.0 Support; Voltage Support 1.8V - VIA Technologies EPIA-P910 User Manual

VIA EPIA-P910 User Manual

6.6.4. SDIO_CR Configuration

The SDIO_CR Configuration screen can be used to set SDIO_CR configuration parameters.

Figure 47: Illustration of SDIO_CR Configuration screen

6.6.4.1. SDIO Host Controller

Available selections are: Enabled and Disabled.

6.6.4.2. SDIO Specification Ver3.0 Support

Available selections are: Enabled and Disabled.

6.6.4.3. Voltage Support 1.8v

Available selections are: Enabled and Disabled.

6.6.4.4. High Speed Support

Available selections are: Enabled and Disabled.

6.6.4.5. Driver Type Select

Available selections are: Type A, Type B, Type C and Type D.

6.6.4.6. SDR50 Support

Available selections are: Enabled and Disabled.

6.6.4.7. SDR104 Support

Available selections are: Enabled and Disabled.

6.6.4.8. DDR50 Support

Available selections are: Enabled and Disabled.

6.6.4.9. SDR50 Tuning Enable

Available selections are: Enabled and Disabled.
44