Appendix.a. Installing Wireless Accessories; A.1. Installing Emio-5531 Usb Wi-Fi & Bluetooth Module; Figure 45: Installing Emio-5531 To The Chassis; Figure 46: Connecting Usb Cable Wi-Fi Cable - VIA Technologies VB9001 User Manual

Appendix.A. Installing Wireless Accessories

This chapter provides you with information on how to install the EMIO module into the VB9001 board. It is
recommended to use a grounded wrist strap before handling computer components. Electrostatic discharge
(ESD) can damage some components.
A.1. Installing EMIO-5531 USB Wi-Fi & Bluetooth module
Step 1
Mount the EMIO-5531 to the prepared standoff in the chassis. Align the two mounting holes on the EMIO-
5531 module with the mounting holes on the standoffs, then secure the EMIO-5531 module in place with two
screws.

Figure 45: Installing EMIO-5531 to the chassis

Step 2
Connect one end of the USB Wi-Fi cable to pin 1, 3, 5, and 7 of the onboard USB 2.0 pin header (USB1 or USB2)
on the VB9001 board, and then connect the other end of the cable to the EMIO-5531 module.

Figure 46: Connecting USB cable Wi-Fi cable

2
1
1
2
7
5
3
1
VB9001 User Manual
34