Sata Power Connector; Figure 11: Sata Power Connector Diagram; Table 10: Sata Power Connector Pinouts - VIA Technologies EPIA-P910 User Manual

2.2.3. SATA Power Connector

The SATA power connector provides both +5V and +12V directly through the board to the SATA drives.
The SATA power connector is labeled as "PWR2". The pinouts of the SATA power connector are shown
below.

Figure 11: SATA power connector diagram

Pin
1 +5V/1A
2 +12V/1A
3 GND

Table 10: SATA power connector pinouts

Signal
VIA EPIA-P910 User Manual
12