Table of Contents
Advertisement
VIA EPIA-P910 User Manual
6.8. Save & Exit
The Save & Exit Configuration screen has the following features:
Figure 50: Illustration of Save & Exit screen
6.8.1. Save Changes and Exit
Save all changes to the BIOS and exit the BIOS Setup Utility. The "F4" hotkey can also be used to trigger
this command.
6.8.2. Discard Changes and Exit
Exit the BIOS Setup Utility without saving any changes. The "Esc" hotkey can also be used to trigger this
command.
6.8.3. Save Changes and Reset
Save all changes to the BIOS and reboot the system. The new system configuration parameters will take
effect.
6.8.4. Discard Changes and Reset
This command reverts all changes to the settings that were in place when the BIOS Setup Utility was
launched.
6.8.5. Save Options
Save Changes done so far to any of the setup options.
6.8.6. Save Changes
Save system configuration and continue. For some of the options it required to reset the system to take
effect.
6.8.7. Discard Changes
Undo the previous changes.
48
Advertisement
Table of Contents
