Output Patching - Yamaha 006IPTO-F0 Owner's Manual

112
Chapter 9—Input & Output Patching

Output Patching

The DM1000's Stereo Out, Bus Out 1–8, Aux Out 1–8 signals can be patched to any outputs
and slot channels.
Patch example:
By default, the following signal paths are patched to outputs and slot output channels:
OMNI OUT connectors 1–8
OMNI OUT connectors 9–10
OMNI OUT connectors 11–12
Channels 1–8 of Slot 1
Channels 9–16 of Slot 1
Channels 1–8 of Slot 2
Channels 9–16 of Slot 2
2TR OUT DIGITAL 1 (L)
2TR OUT DIGITAL 1 (R)
2TR OUT DIGITAL 2 (L)
2TR OUT DIGITAL 2 (R)
Tip:
• You can patch a signal to multiple outputs and slot channels.
• You can store the Output Patch settings to the Output Patch library. Refer to Chapter 15
"Libraries" on page 173 for more information.
You can change these patches, if you desire. The procedure for patching signals to output
varies depending on the output connectors and slots.
DM1000 Version 2—Owner's Manual
Stereo Out L
Stereo Out R
Aux Out 1
Aux Out 2
Aux Out 3
Aux Out 4
Aux Out 5
Aux Out 6
Output connectors and slot
channels
Output Patching
OMNI Out connector 1
OMNI Out connector 2
OMNI Out connector 3
OMNI Out connector 4
OMNI Out connector 5
OMNI Out connector 6
OMNI Out connector 7
OMNI Out connector 8
Signal flow
Aux Outs 1–8
Stereo Out L & R
Control Room Monitor L & R
Bus Outs 1–8
Bus Outs 1–8
Bus Outs 1–8
Bus Outs 1–8
Stereo Out L
Stereo Out R
Stereo Out L
Stereo Out R