Download  Print this page

Patching The Output Ports - Yamaha RIVAGE PM10 Systems Setup Manual

Digital mixing system.
Hide thumbs

Advertisement

Table of Contents
5.
Press the desired grid cell to patch a desired
channel.
For this example, press the grid cell on which the
INPUT jack (M1/RY SLOT1/1) intersects with input
channel (CH 1).
38
RIVAGE PM10 System Setup Guide

Patching the output ports

This section explains how to patch output channels to the
OUTPUT jacks to which the speaker system has been
connected in the "Connecting the devices" section.
1.
Press the PATCH button on the menu bar in
the touch screen.
The PATCH screen will appear.
2.
Press the Output tab.
3.
Use the knob in the upper-right corner to
display the desired OUTPUT jacks.
NOTE
If you press an on-screen knob that you want to control,
you will be able to operate the knob via the [TOUCH AND
TURN] knob.
If you select RY card slot 2 on the I/O rack (M1),
"M1/RY SLOT2" will appear.
4.
Use the knob in the lower-left corner to
display the output channels.

Advertisement

Table of Contents

   Related Manuals for Yamaha RIVAGE PM10

Comments to this Manuals

Symbols: 0
Latest comments: