Yamaha 006IPTO-F0 Owner's Manual page 74

74
Chapter 6—Input Channels
C
BUS ROUTING/FOLLOW PAN section
• BUS ROUTING............ This section enables you to select a destination Bus for the
• FOLLOW PAN ............. This button determines whether the Input Channel's Pan set-
D
AUX section
• AUX ............................... These controls set the currently-selected Input Channel's Aux
E
Meter section
• Meters............................ These meters indicate the levels of the currently-selected Input
• PRE EQ/PRE FADER/POST FADER ........... The metering position is displayed below
F
GROUP section
• FADER/MUTE/EQ/COMP ................These buttons indicate which Fader, Mute, EQ,
DM1000 Version 2—Owner's Manual
selected channel. When the D button is turned on, the channel
signal is patched to the Direct Out selected in the parameter
box below the button.
ting is applied to the paired Bus Outs (Follow Pan function).
When the button is turned off, the Follow Pan function is dis-
abled and an identical signal is sent to the paired Bus Outs. In
surround mode, it also determines whether the Surround Pan
setting is applied to the Bus Outs.
Send 1–8 levels and positions. (See page 93 for more informa-
tion on Aux Sends.)
Channel.
the meters.
or Comp group, if any, the currently-selected
Input Channel is in. If the channel is in a group,
the group number appears. If the channel is not
in a group, "—" appears.