Yamaha 006IPTO-F0 Owner's Manual page 316

316
Appendix A: Parameter Lists
REV->SYMPHO.
One input, two output reverb and symphonic effects
in series.
Parameter Range
REV TIME 0.3–99.0 s
INI. DLY 0.0–500.0 ms
HI. RATIO 0.1–1.0
DIFF. 0–10
DENSITY 0–100%
THRU,
HPF
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
LPF
THRU
REV.BAL 0–100%
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
MOD. DLY 0.0–500.0 ms
WAVE Sine, Tri
SYNC OFF, ON
1
NOTE
1.
REV->PAN
One input, two output reverb and autopan effects in
parallel.
Parameter Range
REV TIME 0.3–99.0 s
INI. DLY 0.0–500.0 ms
HI. RATIO 0.1–1.0
DIFF. 0–10
DENSITY 0–100%
THRU,
HPF
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
LPF
THRU
REV.BAL 0–100%
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
1
DIR.
WAVE Sine, Tri, Square
SYNC OFF, ON
2
NOTE
1. L<–>R, L–>R, L<–R, Turn L, Turn R
2.
DM1000 Version 2—Owner's Manual
Description
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Spread
Reverb density
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Reverb and symphonic reverb
balance (0% = all symphonic
reverb, 100% = all reverb)
Modulation speed
Modulation depth
Modulation delay time
Modulation waveform
Tempo parameter sync on/off
Used in conjunction with
TEMPO to determine FREQ.
Description
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Spread
Reverb density
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Reverb and panned reverb bal-
ance (0% = all panned reverb,
100% = all reverb)
Modulation speed
Modulation depth
Panning direction
Modulation waveform
Tempo parameter sync on/off
Used in conjunction with
TEMPO to determine FREQ.
DELAY+ER.
One input, two output delay and early reflections
effects in parallel.
Parameter Range
DELAY L 0.0–1000.0 ms
DELAY R 0.0–1000.0 ms
FB. DLY 0.0–1000.0 ms
FB. GAIN –99 to +99%
HI. RATIO 0.1–1.0
THRU,
HPF
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
LPF
THRU
DLY/ER 0–100%
S-Hall, L-Hall, Ran-
TYPE dom, Revers, Plate,
Spring
ROOMSIZE 0.1–20.0
LIVENESS 0–10
INI. DLY 0.0–500.0 ms
DIFF. 0–10
DENSITY 0–100%
ER NUM. 1–19
SYNC OFF, ON
1
NOTE L
NOTE R
1
NOTE FB
1
1.
(Maximum value depends on the tempo setting)
Description
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for
normal-phase feedback, minus
values for reverse-phase feed-
back)
High-frequency feedback ratio
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Delay and early reflections bal-
ance (0% = all delay, 100% = all
early reflections)
Type of early reflection simula-
tion
Reflection spacing
Early reflections decay character-
istics (0 = dead, 10 = live)
Initial delay before reverb begins
Spread
Reverb density
Number of early reflections
Tempo parameter sync on/off
Used in conjunction with
TEMPO to determine left chan-
nel DELAY L
Used in conjunction with
TEMPO to determine right chan-
nel DELAY R
Used in conjunction with
TEMPO to determine FB. DLY