Yamaha 006IPTO-F0 Owner's Manual page 69

F
LOW, L-MID, H-MID, HIGH sections
These sections contain the Q, Frequency (F), and Gain (G) parameters for the four
bands. These parameter values range as follows:
Parameter LOW
HPF, 10.0 to 0.10
Q
(41 steps), L.SHELF
Frequency
Gain
1. The LOW and HIGH GAIN controls function as filter on/off controls when Q is set to HPF or LPF
respectively.
Tip:
• The LOW-band EQ functions as a high-pass filter when the Q parameter in the LOW section
is set to HPF. It functions as a shelving-type EQ when the Q parameter is set to L.SHELF.
• The HIGH-band EQ functions as a low-pass filter when the Q parameter in the HIGH sec-
tion is set to LPF. It functions as a shelving-type EQ when the Q parameter is set to H.SHELF.
3 Move the cursor to the desired parameter, then rotate the Parameter wheel
to change the value.
Tip:
• You can also press the buttons in the SELECTED CHANNEL section to select the desired
band and use the rotary controls to directly edit the Q, F, and G parameters (see page 75).
• You can store the EQ settings in the EQ library, which features preset programs that can be
used for various applications (see page 184).
Setting the Input Channels from the Display
LOW-MID HIGH-MID
10.0 to 0.10 (41 steps)
21.2 Hz to 20.0 kHz (120 steps per 1/12 octave)
–18.0 dB to +18.0 dB (0.1 dB steps)
DM1000 Version 2—Owner's Manual
69
HIGH
LPF, 10.0 to 0.10
(41 steps), H.SHELF
1
6