Grab Button - Yamaha 006IPTO-F0 Owner's Manual

224
Chapter 17—Remote Control
■ SELECTED CHANNEL Section
• ROUTING [1] button
Selects the previous track to be controlled by the Joystick.
• ROUTING [2] button
Selects the next track to be controlled by the Joystick.
• ROUTING [3] button
Functions the same as the [OPTION] key on a computer keyboard.
• ROUTING [4] button
Switches between L and R of the selected track. The [4] button indicator lights up when the
R channel is selected.
• ROUTING [5] button
Selects Main, or Send (in this order) for the selected track.
• ROUTING [6] button
Selects a controller mode for Panner operation. The button does not affect the DM1000's
operation.
• ROUTING [7] button
Selects Send, or Main (in this order) for the selected track.
• ROUTING [8] button
Mutes or unmutes the selected track. The [8] button indicator lights up while the track is
muted.
• ROUTING [DIRECT] button
Functions the same as the [SHIFT] key on the computer keyboard.
• [GRAB] button
Press this button, turning on the button indicator, then operate the Joystick to quickly set
the pan position.
• Joystick
Operating the Joystick while the [GRAB] button indicator is turned on enables you to
quickly set the pan position.
■ Data Entry section
• [ENTER] button
This button switches the on/off status of the buttons on the display.
• Left, Right, Up, Down ([
These buttons move the cursor on the display.
• [INC] & [DEC] buttons
The [INC] button works the same as the Enter key on your computer keyboard. The [DEC]
button works the same as the Esc key on your computer keyboard.
• Parameter wheel
The Parameter wheel enables you to adjust the currently-selected parameter, or execute the
shuttle and scrub operation. By default, it adjusts the value of the currently-selected param-
eter (The P.WHEEL MODE parameter indicates "Prm.").
DM1000 Version 2—Owner's Manual
]/[ ]/[ ]/[ ]) cursor buttons