Video Editors With Confirmed Compatibility; Supported Commands; Remote Connector Pin Assignment - Yamaha 006IPTO-F0 Owner's Manual

264
Chapter 19—Controlling the DM1000 from a Video Editor
Video Editors with confirmed compatibility
As of June 2004, we have confirmed that this system operates correctly with the following
video editors.
• Sony BVE2000, 9100
• Accom Axial 2010, 2020, 3000
• Ampex ACE200
• Panasonic AG A850
For the most recent information, check the following website.
http://www.yamahaproaudio.com/

Supported Commands

All commands are Write commands that will be used to change the status of the DM1000
from the connected video editor.
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

Remote Connector Pin Assignment

You need the following dedicated cable to connect the DM1000's Remote connector to a
video editor.
- Remote connector's pin assignment
* On the dedicated cable, 2 and 8 , and 3 and 7 should be crossed.
DM1000 Version 2—Owner's Manual
Command
All Stop
Transition Duration
Transition Start
Monitor Mode
FROM Machine
TO Machine
Monitor Machine
Swap Machine
FROM Source
TO Source
Monitor Source
FROM Source (Multi-channel)
TO Source (Multi-channel)
Monitor Source (Multi-channel)
Transition Duration (Multi-channel)
Pin # Connector on a video editor
1
Ground
2
Receive A
3
Transmit B
4
Ground
5
Spare
6
Ground
7
Receive B
8
Transmit A
9
Ground
Hexadecimal
A0
A7
A9
AA
B4
B5
B6
C0
A1
A3
A5
BC
BD
BE
BF
1 2 3 4 5
6 7 8 9
Remote connector on the DM1000
Ground
Receive A (*)
Transmit B (*)
Ground
Spare
Ground
Receive B (*)
Transmit A (*)
Ground