Yamaha 006IPTO-F0 Owner's Manual page 278

278
Chapter 20—Other Functions
Trigger signal polarity =
Trigger signal polarity =
At this time, the trigger signal is output from the CONTROL port when you operate the
assigned parameters or controls.
Tip: Refer to the next page for a complete list of assignable parameters and controls.
■ Parameters available in the INPUT section
No Assign
TALKBACK
DIMMER
BUS
SLOT
STEREO
2TRD1
2TRD2
TALKBACK UNLATCH
DIMMER UNLATCH
BUS UNLATCH
SLOT UNLATCH
STEREO UNLATCH
2TRD1 UNLATCH
2TRD2 UNLATCH
CH1 ON
CH48 ON
BUS1 ON
BUS8 ON
• TALKBACK/DIMMER .......................Same as the MONITOR [TALKBACK] and
• BUS/SLOT ............................................Same as the MONITOR [BUS] and [SLOT] but-
• STEREO/2TRD1/2TRD2....................Same as the MONITOR [STEREO], [2TRD1],
DM1000 Version 2—Owner's Manual
Output signals from
the CONTROL port
Output signals from
the CONTROL port
AUX1 ON
:
AUX8 ON
ST ON
CH1 ON UNLATCH
:
CH48 ON UNLATCH
BUS1 ON UNLATCH
:
BUS8 ON UNLATCH
AUX1 ON UNLATCH
:
AUX8 ON UNLATCH
ST ON UNLATCH
UDEF1
:
: UDEF12
:
[DIMMER] button functions.
ton functions.
and [2TRD2] button functions.