Yamaha 006IPTO-F0 Owner's Manual page 317

DELAY->ER.
One input, two output delay and early reflections
effects in series.
Parameter Range
DELAY L 0.0–1000.0 ms Left channel delay time
DELAY R 0.0–1000.0 ms Right channel delay time
FB. DLY 0.0–1000.0 ms Feedback delay time
Feedback gain (plus values for
normal-phase feedback, minus
FB. GAIN –99 to +99%
values for reverse-phase feed-
back)
HI. RATIO 0.1–1.0 High-frequency feedback ratio
THRU,
HPF High-pass filter cutoff frequency
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
LPF Low-pass filter cutoff frequency
THRU
Delay and early reflected delay
DLY.BAL 0–100% balance (0% = all early reflected
delay, 100% = all delay)
S-Hall, L-Hall, Ran-
Type of early reflection simula-
TYPE dom, Revers, Plate,
tion
Spring
ROOMSIZE 0.1–20.0 Reflection spacing
Early reflections decay character-
LIVENESS 0–10
istics (0 = dead, 10 = live)
INI. DLY 0.0–500.0 ms Initial delay before reverb begins
DIFF. 0–10 Spread
DENSITY 0–100% Reverb density
ER NUM. 1–19 Number of early reflections
SYNC OFF, ON Tempo parameter sync on/off
Used in conjunction with
1
NOTE L TEMPO to determine left chan-
nel DELAY L
Used in conjunction with
NOTE R TEMPO to determine right chan-
1
nel DELAY R
Used in conjunction with
NOTE FB 1
TEMPO to determine FB. DLY
1.
(Maximum value depends on the tempo setting)
DELAY+REV
One input, two output delay and reverb effects in
parallel.
Description Parameter
DELAY L
DELAY R
FB. DLY
FB. GAIN
DELAY HI
HPF
LPF
DLY.BAL
REV TIME
INI. DLY
REV HI
DIFF.
DENSITY
SYNC
NOTE L
NOTE R
NOTE FB
1.
Effects Parameters
Range
0.0–1000.0 ms Left channel delay time
0.0–1000.0 ms Right channel delay time
0.0–1000.0 ms Feedback delay time
Feedback gain (plus values for
normal-phase feedback, minus
–99 to +99%
values for reverse-phase feed-
back)
Delay high-frequency feedback
0.1–1.0
ratio
THRU,
High-pass filter cutoff frequency
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
Low-pass filter cutoff frequency
THRU
Delay and reverb balance (0% =
0–100%
all delay, 100% = all reverb)
0.3–99.0 s Reverb time
0.0–500.0 ms Initial delay before reverb begins
0.1–1.0 High-frequency reverb time ratio
0–10 Spread
0–100% Reverb density
OFF, ON Tempo parameter sync on/off
Used in conjunction with
1
TEMPO to determine left chan-
nel DELAY L
Used in conjunction with
1 TEMPO to determine right chan-
nel DELAY R
Used in conjunction with
1
TEMPO to determine FB. DLY
(Maximum value depends on the tempo setting)
DM1000 Version 2—Owner's Manual
317
Description