Yamaha 006IPTO-F0 Owner's Manual page 233

Automation
You can view the Pro Tools Automation mode as follows:
1 Press the [F3] or [F4] button to display the channels for remote control.
2 Press the DISPLAY ACCESS [AUTOMIX] button.
The channel's Automation settings are displayed.
While the STEREO [AUTO] button is on, the channel [SEL] button indicators also display
the channel's Automation mode.
Pro Tools
Auto write
Auto touch
Auto latch
Auto read
Auto off
Tip: If you assign the parameter that controls Automation to one of the User Defined buttons,
you can control the Automation settings by holding down the programmed User Defined but-
ton and pressing the [SEL] button of the target channel. See page 274 for more information
on assigning parameters to User Defined buttons.
Pro Tools Remote Layer
Display [SEL] Button Indicators
Wrt
Flashing red (Record Ready)
Tch
Red (Recording)
Ltch
Read Green
Off Off
233
DM1000 Version 2—Owner's Manual
17