Yamaha 006IPTO-F0 Owner's Manual page 211

Tip:
• You can select all parameter buttons simultaneously by moving the cursor to a non-high-
lighted button and double-clicking the [ENTER] button. A confirmation window appears.
• You can deselect all selected parameter buttons simultaneously by moving the cursor to a
highlighted button and double-clicking the [ENTER] button. A confirmation window
appears.
6 To execute the selected Job, move the cursor to the EXEC button, then press
[ENTER].
A confirmation window appears. Move the cursor to the YES button, then press [ENTER]
to execute the Job.
Tip:
• Move the cursor to the NO button, then press [ENTER] to abort the Job.
• To return to the previous page without executing the Job, move the cursor to the
button, then press [ENTER].
Event Edit Page
The Event Edit page enables you to edit, duplicate, delete events and insert new events.
1 Press the DISPLAY ACCESS [AUTOMIX] button repeatedly until the Automix
| Event Edit page appears.
A
Event list
This list contains the Automix event time, channels, and parameter values. The cur-
rently-selected event in the list is indicated by a triangular icon (®). Use the Up and
Down cursor buttons to select an event, and use the Left and Right cursor buttons to
select a parameter value of the selected event.
B
SYNC
This button synchronizes the event list to the current timecode position. Move the cur-
sor to this button, then press [ENTER] to select events closest to the current timecode
position.
C
DUPLICATE
This button duplicates the event selected in the list.
D
DELETE
This button deletes the event selected in the list.
Editing Events Offline
1 5 3
7 K
DM1000 Version 2—Owner's Manual
211
2
4
6
8
9
J
16