Figure 2-113 Markers Button In The Measure Section; Figure 2-114 Markers Dialog - Keysight Technologies 8990B User Manual

2 Using the 8990B
Figure 2-113
3 The Markers dialog is displayed on the graphical interface as shown in
Figure 2-114
4 Select the Track Waveform/Free Float/Track Measurement button to toggle
5 Under Marker A and Marker B, select the respective fields to display the
136
Markers button in the Measure section
Figure 2-114.
Markers dialog
between the Track Waveform mode, Free Float mode, and Track Measurement
mode. The track waveform mode sets the marker vertices to always stay close
in line with the waveform power level. The free float mode allows the markers
to move freely on the graph area. The track measurement mode allows the
markers to automatically track the measurements in real time.
source selection. It will reflect all active sources on the front panel at that
point.
Keysight 8990B User's Guide