NEC NEAX2000 IPS System Manual page 301

CÔNG TY VIỄN THÔNG VIỆT PRO Chuyên phân phối tổng đài NEC http://vietpro.com.vn
PZ-M606-A (ETHER)
Switch Settings
This card has no switches.
Mounting PZ-M606-A Card
When mounting the ETHER card on the MP card, do the following procedure.
STEP1: Take off four screws from the rear side of ETHER support.
NOTE:
Supports and screws are attached to the ETHER card.
STEP2: Connect the CONN connector on the ETHER card and the CONN connector on the MP card.
STEP3: Secure the ETHER card to the MP card with four screws which have been taken off by STEP1.
Taking off Screws
Support
ETHER Card
CONN Connector of ETHER Card
Mounting ETHER Card on MP card
ETHER Card
MP Card
CONN Connector on MP Card
– 289 –
ND-71503(E) Rev.5.0
9pch4001.fm
FEBRUARY/28/2002