NEC NEAX2000 IPS System Manual page 221

CÔNG TY VIỄN THÔNG VIỆT PRO
To set the Digital Announcement Trunk (DAT) as the Call Forwarding-Logout destination:
START
CM10 Assign the Digital Announcement Trunk card
number to the required LEN.
NOTE 1:
NOTE 2:
CM14 Assign the Digital Announcement Trunk card
number to the required LEN.
[Series 3200 R6.2 software required]
NOTE:
A
Chuyên phân phối tổng đài NEC
DESCRIPTION
We recommend the setting of Digital
Announcement Trunk Card number
by CM14, when using Series 3200
R6.2 software or later.
The Digital Announcement Trunk
card number must be assigned to the
first LEN (Level 0), the third LEN
(Level 2), the fifth LEN (Level 4) and
the seventh LEN (Level 6) of each
LT slot.
The Digital Announcement Trunk
card number must be assigned to the
first LEN (Level 0), the third LEN
(Level 2), the fifth LEN (Level 4) and
the seventh LEN (Level 6) of each
LT slot.
CHAPTER 3 SYSTEM DATA PROGRAMMING
(1) 000-763: LEN
(2) EB002-EB127: Digital Announcement
For PIM0/1
For PIM2/3
For PIM4/5
For PIM6/7
NOTE:
(1) XX ZZZ: LEN
XX: 00-59: FP No.
ZZZ: 000-127: Port No.
(2) EB002-EB127: Digital Announcement
For FP No. 00 : EB002-EB031
For FP No. 01 : EB032-EB063
For FP No. 02 : EB064-EB095
For FP No. 03 : EB096-EB127
NONE :No data
NOTE:
– 209 –
http://vietpro.com.vn
IP FEATURE PROGRAMMING
DATA
Trunk Card No.
: EB002-EB031
: EB032-EB063
: EB064-EB095
: EB096-EB127
EB000 and EB001 are dedicated
to built-in Digital Announcement
Trunk of the MP card.
Trunk Card No.
EB000 and EB001 are dedicated
to built-in Digital Announcement
Trunk of the MP card.
ND-71503(E) Rev.5.0
JANUARY/16/2004
9pch3002.fm