NEC NEAX2000 IPS System Manual page 130

CÔNG TY VIỄN THÔNG VIỆT PRO
Time Zone/Daylight Saving Time Data Assignment
[Series 3300 software required]
To enable remote connection of stations regardless of nation and area with multiple time zone, do the fol-
lowing programming.
START
CM0B Assign the Location number to each remote
site.
CM67 Assign the Time Zone to each location.
2nd Data
A2345
A2330
A2315
A2300
A0100
A0045
A0030
A0015
NONE
NOTE 1:
NOTE 2:
Assign the Daylight Saving Time to each loca-
tion.
NOTE:
END
Chuyên phân phối tổng đài NEC
DESCRIPTION
+15 minute increments
Time Zone
System Clock +23:45
System Clock +23:30
System Clock +23:15
System Clock +23:00
System Clock +01:00
System Clock +00:45
System Clock +00:30
System Clock +00:15
No Time Zone (No time
difference)
System clock should be assigned by CM02.
After changing the data, office data copy to Remote Site by CMEC Y=8 is required.
After changing the data, office data
copy to Remote Site by CMEC Y=8
is required.
CHAPTER 3 SYSTEM DATA PROGRAMMING
REMOTE PIM OVER IP DATA ASSIGNMENT
• Y=31-60 (Remote Site No. 01-30)
(1) 40
(2) 00-63: Location No.
• Y=10
(1) 00-63: Location No.
(2) Time Zone (See the table below)
NONE : No Time Zone
2nd Data
B0015
B0030
B0045
B0100
B2300
B2315
B2330
B2345
CCC
• Y=30
(1) 00-63: Location No.
(2) 0: Daylight Saving Time (+1 hour)
NONE : No Daylight Saving Time
– 118 –
http://vietpro.com.vn
DATA
-15 minute increments
Time Zone
System Clock -00:15
System Clock -00:30
System Clock -00:45
System Clock -01:00
System Clock -23:00
System Clock -23:15
System Clock -23:30
System Clock -23:45
Time Zone data clear
ND-71503(E) Rev.5.0
9pch3001.fm
SEPTEMBER/15/2004