NEC NEAX2000 IPS System Manual page 215

CÔNG TY VIỄN THÔNG VIỆT PRO
To read/clear the PEG count, do the following programming.
• When reading/clearing the PEG count between location groups that exceeded the limit bandwidth
+ B400 +
ST
00-63 (location number of receiving side) +
• When clearing the PEG counts of all location groups that exceeded the limit bandwidth
+ B400 +
ST
• When reading/clearing the PEG count between location groups that exceeded the warning bandwidth
+ B401 +
ST
00-63 (location number of receiving side) +
• When clearing the PEG counts of all location groups that exceeded the warning bandwidth
+ B401 +
ST
NOTE: The PEG count of 0-49999 can be stored to the system. If the PEG count exceeds 49999, the
system counts it from 0.
To read/clear the bandwidth, do the following programming.
• When reading/clearing the maximum bandwidth between location groups
+ B402 +
ST
00-63 (location number of receiving side) +
• When clearing the maximum bandwidth of all location groups in the system
+ B402 +
ST
• When reading/clearing the bandwidth that are used now
+ B403 +
ST
00-63 (location number of receiving side) +
• When clearing all bandwidth that are used now
+ B403 +
ST
NOTE: The bandwidth of 0-1677721 Kbps can be displayed on MAT/CAT. Even if the bandwidth ex-
ceeds 1677721 Kbps, MAT/CAT displays the bandwidth 1677721 Kbps.
Operating Procedure
No manual operation is required.
Chuyên phân phối tổng đài NEC
+ 00-63 (location number of sending side) +
DE
+ 9999 +
DE DE
+ 00-63 (location number of sending side) +
DE
+ 9999 +
DE DE
+ 00-63 (location number of sending side) +
DE
+ 9999 +
DE DE
+ 00-63 (location number of sending side) +
DE
+ 9999 +
DE DE
CHAPTER 3 SYSTEM DATA PROGRAMMING
+ CCC +
DE
+ CCC +
EXE
+ CCC +
DE
+ CCC +
EXE
+ CCC +
DE
+ CCC +
EXE
+ CCC +
DE
+ CCC +
EXE
– 203 –
http://vietpro.com.vn
IP FEATURE PROGRAMMING
EXE
EXE
EXE
EXE
ND-71503(E) Rev.5.0
9pch3002.fm
JANUARY/16/2004