NEC NEAX2000 IPS System Manual page 245

CÔNG TY VIỄN THÔNG VIỆT PRO
8. This service can be operated on UDP/IP.
9. The UDP port number of the 2000 IPS for SNMP is 161 (fixed/standard).
10. The following MIB objects in the System group are assigned as follows:
MIB object
sysDescr
sysObjectID
sysContact
sysName
sysLocation
NOTE 1:
Maximum of 64 characters can be assigned for each of MIB object "sysContact", "sysName",
"sysLocation" from the MAT. The MIB objects can be overwritten from the SNMP manager
with maximum of 255 characters after they are set by MAT.
Be sure to execute the system data backup after the MIB objects are changed.
NOTE 2:
To register the MIB objects to the 2000 IPS from the SNMP manager, be sure to set the com-
munity name "admin" (CM0B Y=03>01) or optional community name (CM0B Y=03>10-11)
beforehand.
NOTE 3:
The above MIB objects are stored in the MP as system data. Therefore, when the SNMP man-
ager changes the MIB information after saving the system data by MAT, verify error will occur
between the saved system data and the system data in the MP.
There are no problem for the 2000 IPS even if the verify error occurs.
Chuyên phân phối tổng đài NEC
Description
System Information
System object ID
Contact person for the System with
information on how to contact this
person
System name Administratively-
assigned name for the system
Physical location of the system
CHAPTER 3 SYSTEM DATA PROGRAMMING
Default "IPS" (change from MAT is
available)
Fixed as "1.3.6.1.4.1.119.1.76.3"
Assigned by ASCII characters (0-255
characters) from MAT/SNMP manager.
Assigned by ASCII characters (0-255
characters) from MAT/SNMP manager.
Assigned by ASCII characters (0-255
characters) from MAT/SNMP manager.
– 233 –
http://vietpro.com.vn
IP FEATURE PROGRAMMING
Value
ND-71503(E) Rev.5.0
9pch3002.fm
JANUARY/31/2003