NEC NEAX2000 IPS System Manual page 119

CÔNG TY VIỄN THÔNG VIỆT PRO
Setting Office Data Copy
[Series 3200 R6.2 software required]
(1) To copy the office data from the Main Site to Remote Sites automatically once a day;
START
CM43 Assign the start time for copying the office
data from the main site to remote sites.
NOTE 1:
NOTE 2:
NOTE 3:
END
(2) To copy the office data from the Main Site to Remote Sites manually/To read the state of office data
copy;
START
CMEC Specify the site number that is executed the of-
fice data copy /read the state of office data
copy.
NOTE:
END
Chuyên phân phối tổng đài NEC
DESCRIPTION
The state of automatic office data
copy can be read by CMEC Y=8.
Office data copy is executed from
the low remote site number to high
remote site number.
The start time for office data copy
may gain/loss about three minutes
from the time you set.
DESCRIPTION
"1" is displayed in the second data
while the office data being copied.
CHAPTER 3 SYSTEM DATA PROGRAMMING
REMOTE PIM OVER IP DATA ASSIGNMENT
• Y=7
(1) 00
(2) HH MM
HH
MM
9999
NONE : 0200 (2:00 a.m.)
• Y=8
(1) 00 : All remote sites
01-30: Remote Site No.
(2) 0 : Start Office Data Copy
1 : Now copping/Office data copy state
can be read
3 : Stand by/Office data copy state can be
read
– 107 –
http://vietpro.com.vn
DATA
: 00-23 (Hour)
: 00-59 (Minute)
: Not copy the office data auto-
matically
DATA
ND-71503(E) Rev.5.0
JANUARY/16/2004
9pch3001.fm