NEC NEAX2000 IPS System Manual page 164

CÔNG TY VIỄN THÔNG VIỆT PRO
F
CM0A Specify the Type of Service (TOS) field prece-
dence for IP-PAD voice and control packets.
NOTE 1: Set the TOS field precedence by
CM67 Y=01, when using Series
3200 R6.2 software or later.
NOTE 2: The priority of PRECEDENCE 0-7 is as follows.
PRECEDENCE 0: Lowest priority
PRECEDENCE 7: Highest priority
NOTE 3:
Follow the initial data setting usually.
NOTE 4: By this data setting, the router recognizes the precedence of control packets and voice
packets and controls Weighted Fair Queuing (WFQ).
Assign the IP-PAD group number to the LAN
Interface number and VCT number.
[Series 3100 software required]
When no 16VCT card is mounted, assign the
way of connection to the PN-32IPLA/PN-
32IPLA-A (IP-PAD) card number.
[Series 3100 software required]
NOTE 1: When using the IP-PAD card or IP-PAD channel with CODEC/IP-PAD channel without
CODEC properly to each terminal, set the IP-PAD group number combining with location
number.
NOTE 2: When using the PN-8IPLA (IP-PAD) card, do not set this data.
G
Chuyên phân phối tổng đài NEC
DESCRIPTION
IP-PAD INITIAL
NOTE
IP-PAD INITIAL
IP-PAD INITIAL
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=29
(1) 00-31: LAN Interface No.
(2) XZ
X: 0-7
Z: 0-7
NONE : 56
• Y=70
(1) XX Z:
XX: 00-31: LAN Interface No.
Z : 0-1: VCT No.
(2) 00-31
NONE : IP-PAD Group No. 00
• Y=71
(1) 00-31: LAN Interface No.
(2) 0 : Restrict the connection of IP-PAD
without 16VCT
1 : Connect with G.711 fixed
– 152 –
http://vietpro.com.vn
IP-PAD DATA ASSIGNMENT
DATA
: PRECEDENCE 0-7 for voice
packet
: PRECEDENCE 0-7 for control
packet
: IP-PAD Group No.
ND-71503(E) Rev.5.0
SEPTEMBER/15/2004
9pch3001.fm