NEC NEAX2000 IPS System Manual page 127

CÔNG TY VIỄN THÔNG VIỆT PRO
A
CM05 Assign the accommodation type of FP/AP to
the FP/AP number assigned by CM05 Y=0.
NOTE: When the AP card is accommodated
to the remote site, assign the second
data "1" (Remote Site) and set the
second data "3" (AP card) to the
CM05 Y=7.
Assign the type of FP/AP that is accommodat-
ed in the Remote Site.
[Series 3200 R6.2 software required]
NOTE 1: Be sure to set one MP built-in FP
(second data 2) per remote site.
NOTE 2:
To accommodate a D
mote sites, assign the second data
"0" to the FP number of Virtual FP.
NOTE 3: To accommodate an IP-PAD to re-
mote sites, assign the second data
"2" to the FP number of MP built-in
FP.
B
Chuyên phân phối tổng đài NEC
DESCRIPTION
INITIAL
INITIAL
term
IP to re-
CHAPTER 3 SYSTEM DATA PROGRAMMING
REMOTE PIM OVER IP DATA ASSIGNMENT
• Y=6
(1) 00-59: FP/AP No.
(2) 1 : Remote Site
3 : AP card
• Y=7
(1) 00-59: FP/AP No.
(2) 0 : Virtual FP
2 : MP built-in FP
3 : AP card
– 115 –
http://vietpro.com.vn
DATA
ND-71503(E) Rev.5.0
9pch3001.fm
JANUARY/16/2004