NEC NEAX2000 IPS System Manual page 251

CÔNG TY VIỄN THÔNG VIỆT PRO
A
CM0B Set the community name with 1-25 characters
(ASCII code).
[Series 3200 R6.2 software required]
Assign the required IP Address for the SNMP
manager (first place to fourth place).
[Series 3200 R6.2 software required]
NOTE: The system allows the access only from the IP address that is set by this command. But if
no IP address for the SNMP manager (first place to fourth place) are set, the access to the
system is allowed to all SNMP managers.
To avoid the anauthorized access to the system, this data setting is required.
To check the IP address of SNMP manager
from the network address, define the IP ad-
dress of SNMP manager (fourth place) as the
Subnet mask of the IP address for the SNMP
manager (first place).
[Series 3300 R8 software required]
Set the system information (sysDescr) with 1-
128 characters (ASCII code).
[Series 3200 R6.2 software required]
B
Chuyên phân phối tổng đài NEC
DESCRIPTION
INITIAL
INITIAL
INITIAL
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=03
(1) 10: 1-16 characters
11: 17-25 characters
(2) XXXX....XXXX
NONE : No data
• Y=03
(1) 80: First place
81: Second place
82: Third place
83: Fourth place
(2) 000000000000-255255255255:
IP Address for the SNMP manager
NONE : No data
• Y=03
(1) 03
(2) 0 : Subnet Mask of the IP address for the
SNMP manager (first place)
1 : IP address for the SNMP manager
(fourth place)
• Y=03
(1) 20: 1-16 characters
21: 17-32 characters
22: 33-48 characters
23: 49-64 characters
24: 65-80 characters
25: 81-96 characters
26: 97-112 characters
27: 113-128 characters
(2) XXXX....XXXX
NONE : IPS
– 239 –
http://vietpro.com.vn
IP FEATURE PROGRAMMING
DATA
NOTE
ND-71503(E) Rev.5.0
9pch3002.fm
JANUARY/16/2004