NEC NEAX2000 IPS System Manual page 182

CÔNG TY VIỄN THÔNG VIỆT PRO
• To provide Alternate Routing for the other trunk route (Virtual IPT), when a call originating to the
Virtual IPT route is not available due to a fault occurrence, in addition to "Virtual IPT Data Assign-
ment" do the following programming.
START
CM29 Assign a Numbering Plan Group to each ten-
ant.
CM20 Assign the access code for LCR Group 0-3.
CM35
Provide the trunk route of Virtual IPT with Al-
ternate Routing for a fault occurrence.
CM8A Assign an Area Code Development Pattern
number to each LCR Group.
Assign a Route Pattern number to each area
code for the Area Code Development Pattern
number assigned by CM8A Y=A000.
A
Chuyên phân phối tổng đài NEC
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
CCIS VIRTUAL IPT DATA ASSIGNMENT
(1) 00-63: Tenant No.
(2) 710-713: Numbering Plan Group 0-3
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A126: LCR Group 0
A127: LCR Group 1
A128: LCR Group 2
A129: LCR Group 3
• Y=186
(1) 00-63: Trunk Route No.
(2) 0: To provide
• Y=A000
(1) 0-3: LCR Group 0-3
(2) 4005-4007: Area Code Development Pat-
• Y=4005-4007 Area Code Development
(1) X...X: Area Code, Maximum 8 digits
(2) 0000-0255: Route Pattern No. 000-255
– 170 –
http://vietpro.com.vn
DATA
tern No. 5-7
Pattern No. 5-7
ND-71503(E) Rev.5.0
9pch3001.fm
JANUARY/31/2003