NEC NEAX2000 IPS System Manual page 124

CÔNG TY VIỄN THÔNG VIỆT PRO
A
CM05
Assign the accommodation type of the FP/AP
to the FP/AP number assigned by CM05 Y=0.
NOTE 1: To accommodate a D
the second data "0" to the FP num-
ber of Virtual FP.
NOTE 2: To accommodate an IP-PAD, assign
the second data "2" or "3" to the
FP number of FP card/MP built-in
FP.
NOTE 3:
To accommodate a Virtual IPT, as-
sign the second data "0" to the AP
number of Virtual IPT.
NOTE 4: For the system uses Series 3200
R6.2 software or before, do not set
the second data "0" (Virtual FP) for
PS Virtual station.
Set the second data "3" (FP card).
B
Chuyên phân phối tổng đài NEC
DESCRIPTION
INITIAL
term
IP, assign
CHAPTER 3 SYSTEM DATA PROGRAMMING
REMOTE PIM OVER IP DATA ASSIGNMENT
[For Series 3400 software or later]
• Y=8
(1) 00-59: FP/AP No.
(2) XX ZZ/ZZZZ (Site No. + PIM No.)
XX
ZZ
ZZZZ
NONE : See
• Y=6
(1) 00-59: FP/AP No.
(2) 0 : Virtual FP/Virtual AP
2 : MP built-in FP
3 : FP card (PN-CP15)/AP card
– 112 –
http://vietpro.com.vn
DATA
: 00: Main Site
: 00-15, 99: Physical PIM No./
Virtual PIM No.
: 0001-1415: PIM No.00-14
(smaller number) + PIM No.01-
15 (larger number)
"System Data Memory All
Clear". Page 83
ND-71503(E) Rev.5.0
SEPTEMBER/15/2004
9pch3001.fm