NEC NEAX2000 IPS System Manual page 179

CÔNG TY VIỄN THÔNG VIỆT PRO
G
CM8A Assign the Destination IP Address Pattern
number to the LCR Pattern number.
Assign the Destination Point Code (DPC) for
Virtual IPT.
NOTE: Do not assign the same DPC to the
plural LCR pattern numbers. If the
same DPC is assigned to the plural
LCR pattern numbers, the CCIS fea-
ture such as Outgoing Trunk Queu-
ing-CCIS cannot be used.
Specify the release timer for each opposite of-
fice respectively.
NOTE: When setting the release timer to each trunk route, set the second data to "NONE".
H
Chuyên phân phối tổng đài NEC
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
CCIS VIRTUAL IPT DATA ASSIGNMENT
• Y=5000-5255 LCR Pattern No. 000-255
(1) 167: Destination IP Address Pattern
(2) 000-255: IP Address Pattern No.
• Y=5000-5255 LCR Pattern No. 000-255
(1) 168: Destination Point Code for Virtual IPT
(2) 00001-16367: Destination Point Code
• Y=5000-5255 LCR Pattern No. 000-255
(1) 171: Release Timer for Virtual IPT
(2) 000
001-127 : 1-127 minutes
999
NONE : As per CMA7 Y=45
– 167 –
http://vietpro.com.vn
DATA
: 30 seconds
: Not released
ND-71503(E) Rev.5.0
JANUARY/16/2004
9pch3001.fm