NEC NEAX2000 IPS System Manual page 141

CÔNG TY VIỄN THÔNG VIỆT PRO
term
D IP Login/Logout Data Assignment
term
(1) For D IP Login (Automatic Login Mode)
To register the D
term
NOTE: D SP20 is registered in Automatic Login mode only.
START
CM08 Specify the way of ID registration.
CM12 Assign Service Restriction Class C to the re-
quired stations.
CM15 Assign the way of ID registration to Service
Restriction Class C assigned by CM12Y=07.
[Series 3100 software required]
NOTE:
CM2B Assign the Password for initial setup which is
used for the automatic login mode, if required.
[Series 3100 software required]
CM08
Specify if the system encodes the station num-
ber when the D
[Series 3100 software required]
Specify if the system encodes the password
when the D
Specify the encoding method of the password.
[Series 3100 software required]
NOTE:
END
Chuyên phân phối tổng đài NEC
term
IP ID for Automatic Login mode, do the following programming.
DESCRIPTION
This data is effective only when
CM08>513 is set to 1.
term
IPs login to the network.
term
IPs login to the network.
Do not set the 2nd data 0, when the
destination IP terminal does not
support the MD5 encoding.
CHAPTER 3 SYSTEM DATA PROGRAMMING
(1) 513
(2) 1 : As per CM15 Y=480
• Y=07
(1) X-XXXXXXXX: D
(2) 00-15 : Service Restriction Class C
• Y=480
(1) 00-15: Service Restriction Class C assigned
(2) 7 : Automatic Login Mode
(Authentication by MAC Address)
• Y=10
(1) 00
(2) Z-ZZZZZZZZ: Password for initial setup
Z: 0-9, A (*), B (#)
(1) 514
(2) 0 : To encode by NEC original method
1 : Not encoded
(1) 515
(2) 0 : Not encoded
1 : As per CM08>517
(1) 517
(2) 0 : MD5
1 : NEC original method
– 129 –
http://vietpro.com.vn
term
D IP DATA ASSIGNMENT
DATA
term
IP Station No.
by CM12 Y=07
ND-71503(E) Rev.5.0
FEBRUARY/28/2002
9pch3001.fm