NEC NEAX2000 IPS System Manual page 159

CÔNG TY VIỄN THÔNG VIỆT PRO
A
CM0A [For PN-8IPLA]
• When accommodated in odd numbered PIM (PIM1/3/5/7)
PIM
1/3/5/7
• When accommodated in even numbered PIM (PIM0/2/4/6)
PIM
0/2/4/6
Assign the IP address for the LAN Interface of
the IP-PAD card.
Assign the Subnet Mask for the LAN Interface
of the IP-PAD card.
Assign the Default Gateway Address for the
LAN Interface of the IP-PAD card.
Assign the TCP/UDP/RTP port number for the
LAN Interface of the IP-PAD card.
NOTE 1: Follow the initial data setting usual-
ly.
NOTE 2:
Set this data when the router or fire-
wall provides the restriction by TCP
port.
B
Chuyên phân phối tổng đài NEC
DESCRIPTION
IP-PAD INITIAL
IP-PAD INITIAL
IP-PAD INITIAL
IP-PAD INITIAL
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=01
(1) 00-31: LAN Interface No.
(2) 000000000000-255255255255:
IP Address
NONE : No data
• Y=02
(1) 00-31: LAN Interface No.
(2) 000000000000-255255255255:
Subnet Mask
NONE : No data
• Y=03
(1) 00-31: LAN Interface No.
(2) 000000000000-255255255255:
Default Gateway Address
NONE : No data
• Y=10-17 LAN Interface No. 00-07
• Y=30-37 LAN Interface No. 08-15
• Y=100-115 LAN Interface No. 16-31
(1) 90: UDP Port for Voice control
(2) 01024-65534: UDP Port No.
NONE
– 147 –
http://vietpro.com.vn
IP-PAD DATA ASSIGNMENT
DATA
: 50000 [50000 (1port is
used)]
NOTE 1, NOTE 2
ND-71503(E) Rev.5.0
9pch3001.fm
JANUARY/16/2004