Belt Position Adjustment - Roland Advanced Jet AJ-1000 Service Notes

4-10 BELT POSITION ADJUSTMENT

Make sure to perform BELT TENSION ADJUSTMENT before doing this adjustment.
Serial Number ZU50220 and below
Turn on Printer Main Power SW.
1
Turn on SUB POWER SW while pressing [
2
keys to enter SERVICE MODE.
Select [I/S MENU] > [I/S CONTROL] > [HEAD UP/DOWN] >
3
[OPEN] and press [ENTER] key. Head Carriage moves up
and you can now move Head Carriage by hand.
<Rear View>
], [ ] and [ ]
[
4-43
Printer Main Power SW
], [ ], [ ] + POWER ON
[MENU] key
MENU
SERVICE MENU
SERVICE MENU
I/S MENU
[ ]
I/S MENU
I/S CONTROL
[ ]
I/S CONTROL
HEAD UP/DOWN
[ ]
HEAD UP/DOWN
OPEN
[ENTER]