Roland Advanced Jet AJ-1000 Service Notes page 105

Fix the spring. Then, check the Motor Gear meshes with
9
the Drive Gear and tighten up the screws to fix the Flange.
Apply a proper quantity of grease (FLOIL GE-
676) between Drive gear and Motor gear.
Connect the connector of the Motor Cable.
10
Connect the Panel Cable to the Panel Board and
11
fix the Panel Cover.
Perform the SERVO LOCK CHECK.
12
Turn on the main power and then turn on the sub power
while pressing the Left, Right and Down keys to enter the
Service Mode.
Drive Gear
[ ], [
MENU
SERVICE MENU
3-20
Motor Gear
Spring
Connector
Panel Cover
], [ ] + POWER ON
[MENU] key