Roland Advanced Jet AJ-1000 Service Notes page 152

I/S MENU CAP ADJUST
CAP ADJUST 0.00 >
I/S MENU
NOW PROCESSING..
HEAD U/D AGING
I/S MENU NOW PROCESSING..
WIPER AGING
I/S MENU
NOW PROCESSING..
SLIDER AGING
CARTRIDGE
I/S MENU
IC CHECK
CARTRIDGE
CARTRIDGE
SLOT 1
Set the cartridge to the slot
in order from SLOT1 to SLOT6
CARTRIDGE
SLOT 6
CARTRIDGE
SLOT M
The various information currently written in the Ink Cartridge IC is read for every cartridge slot.
It becomes as follows when an error occurs.
Ink Cartridge is not inserted.
SLOT1
NO CARTRIDGE
Use with [ ] and [ ] keys to change Cap Adjustment value.
The setting range is from -2.00 to +2.00. It can be adjusted in increments of 0.25.
Head can be moved in the downward direction in increments of 0.25.
When you move in the upward direction, press [ ] key to move Head to the upper end.
-2.00
When [ ] key is pressed, Heads will be capped and you can go out from the menu
without updating the adjustment value.
When the [ENTER] key is pressed, the setting will be applied.
HEAD U/D AGING
COMPLETED
normal (beeps 1 time)
HEAD U/D AGING
FAILED !!
error (beeps 2 times)
WIPER AGING
COMPLETED
normal (beeps 1 time)
WIPER AGING
FAILED !!
error (beeps 2 times)
SLIDER AGING
COMPLETED
normal (beeps 1 time)
WIPER AGING
FAILED !!
error (beeps 2 times)
IC CHECK
SLOT 1 INSERT
Set the cartridge to the slot
in order from SLOT1 to SLOT6
IC CHECK
SLOT 6 INSERT
IC CHECK
SLOT M INSERT
This menu is for checking if there is a problem with the device or data communication by checking Detection, Writing,
and Loading of an Ink Cartridge IC and a Maintenance Liquid Cartridge IC.
When the [ENTER] key is pressed, it becomes ready for insertion of an Ink Cartridge to SLOT 1.
The message for SLOT 1 is displayed by establishing communication with the cartridge IC automatically when a cartridge
is inserted and slot cover is closed.
IC CHECK
SLOT1 OK
Normal (beeps 1 time)
When the cartridge in SLOT 1 is extracted, it becomes ready for insertion of an Ink Cartridge to SLOT 2.
The result of whole SLOT(1 to M) are displayed when the check is completed to SLOT M.
When the result is displayed, the slot number which had an error is also displayed at the bottom.
Note
*The cartridge with IC should be used.
*Check if Ink Cartridge IC Board and Ink Cover Sensor works correctly before performing this check.
SL1 : INK TYPE
EXt Ink K
SL1 : CAPACITY
SL1 : CONSUMED
100.000cc
SL1 : TIME
0y000d00h00m00s
SL1 : INSERT
SL1 : INK PACK
2005/05/15
SL1 : INK
2005/05/15
SL1 :CARTRIDGE
Data error
SLOT1
DATA ERROR
4-5
IC CHECK
COMPLETED
normal (beeps 1 time)
IC CHECK ERROR
SLOT 123456M
error (beeps 2 times)
IC CHECK
SLOT1 ERROR
Ink type of the Ink Cartridge IC
is displayed.
Ink capacity of the Ink Cartridge IC
1000cc
is displayed.
Ink consumption amount of the Ink
Cartridge is displayed.
The using time of the Ink Cartridge
is displayed.
The number of times of insertion
1 times
of the Ink Cartridge is displayed.
The date of packing
is displayed.
The date of manufacture of the Ink
is displayed.
The date of manufacture of the Ink Cartridge
2005/06
is displayed.
Error (beeps 2 times)